SKF 6207 2ZNRJEM Single Row Ball Bearings

A:9 mm; d1:320 mm; G2:G 1/4; G:Tr 360x5; B1:264 mm; G1:38 mm; d:340 mm; Mass withdrawal sleeve:32 kg; Nut for removal:HM 3172; Hydraulic nut:HMV 72 E;

B:43 mm; Pu:31.430 kN; D:170 mm; b:mm; rs (min):2.1 mm; Dynamic (Ca):233 kN; s:3 mm; r1s (min):2.1 mm; E:mm; b1:mm;

Limiting speed:32000 r/min; Fw:10 mm; Basic dynamic load rating C:4.57 kN; Reference speed:28000 r/min; Basic static load rating C0:5.7 kN; U:10 mm; Mass needle roller and cage assembly:0.0016 kg; Fatigue load limit Pu:0.63 kN; Ew:13 mm;

d:75 mm; d1:135 mm; Mass shaft washer:0.97 kg; B:12.5 mm; r1,2 min.:1.5 mm;

Grease Speed Rating n1:6000 rpm; Basic Static Radial Load Rating Co:36500 N; B:27.00 mm; Fillet Radius ra:1.00 mm; Sealed Speed Rating n3:6000 rpm; Basic Dynamic Radial Load Rating C:39100 N; Accessories:Shield & Seal & Snap; d:35.000 mm; D:72.0000 mm; Oil Speed Rating n2:8000 rpm;

dynamic Cr:17.270 kN; H:12 mm; d:15 mm; rs (min):0.6 mm; D1:17 mm; Grease:6 000 min-1; d1:13 mm; D:32 mm; Oil:7 900 min-1; static Cor:24.400 kN;

Grease Speed Rating n1:3800 rpm; Oil Speed Rating n2:5000 rpm; D:120.0000 mm; d:55.000 mm; Basic Dynamic Radial Load Rating C:138000 N; B:58.00 mm; Fillet Radius rb:1.00 mm; Basic Static Radial Load Rating Co:120000 N; Fillet Radius ra:2.00 mm;

Basic dynamic load rating C:62 kN; d:30 mm; l1 min.:65 mm; B:22 mm; l2 max.:149 mm; dk:40.7 mm; Specific dynamic load factor K:100 N/mm²; h:110 mm; Basic static load rating C0:81.5 kN; Mass rod end:0.9 kg;

P90°:334 kN; P180°:222 kN; P60°:557 kN; Pa:145 kN; Taconite seal (dc shaft position):TER 164; Lock nut:AN 40; Da:359.999 mm; Housing:SAFS 240; J min.:571.5 mm; da:200 mm;

Mass pillow block:108 kg; Bearing:22326 CCK/W33; Cap bolt:4 x 3/4-10 UNC; L:558.8 mm; Eye bolt:2 x 3/8-16 UNC; Stabilizing ring:SR-0-26; H1:169.875 mm; End plug (suffix Y):EPR 15; P150°:78.3 kN; R2:33.337 mm;

d3:560 mm; Lock washer / Locking clip:MS 30/500-96; G:Tr 480x5; h:15 mm; B:60 mm; d2:503 mm; B5:77 mm; d1:530 mm; Associated spanner:TMFN 80-500; Associated eyebolt for handling:M 10;

Basic Dynamic Radial Load Rating C:23400 N; d:55.000 mm; Fillet Radius ra:1.00 mm; Oil Speed Rating Open/Shielded n2:8300 rpm; B:12.00 mm; D:100.0000 mm; Grease Speed Rating Open/Shielded n1:6800 rpm; Basic Static Radial Load Rating Co:20000 N;

B1:242 mm; G1:30 mm; A:9 mm; Mass withdrawal sleeve:32 kg; Nut for removal:HM 3192; G2:G 1/4; d:440 mm; Hydraulic nut:HMV 92 E; d1:420 mm; B2:264 mm;

Fillet Radius rb:1.00 mm; d:250.000 mm; Basic Dynamic Radial Load Rating C:393000 N; D:410.0000 mm; Fillet Radius ra:3.00 mm; Oil Speed Rating n2:1800 rpm; Grease Speed Rating n1:1500 rpm; B:57.00 mm; Basic Static Radial Load Rating Co:600000 N;

A1:16.1 mm; End cover:ECL 207; N:13.1 mm; J1:31.8 mm; Limiting speed with shaft tolerance h6:3200 r/min; Basic static load rating C0:15.3 kN; L:95 mm; Fatigue load limit Pu:0.655 kN; s1:25.4 mm; Thread grub screw G2:5/16-24 UNF;