FAG NJ2232-E-M1-C3 Cylindrical Roller Bearings

A:38 mm; Designation of housing:FL209-; A2:53 mm; C0:20.8 kN; H:188 mm; L:108 mm; Weight:1.92 kg; Recommended tightening torque for set screw:8 Nm; A1:16 mm; B:41.2 mm;

Static load, C0:98 kN; d:45.62 mm; Y0:0.99; B:25.4 mm; Characteristic inner ring frequency, BPFI:10.22 Hz; Characteristic cage frequency, FTF:0.43 Hz; e:0.33; d1:63 mm; Nlim (oil):6,000 rpm; Rating life coefficient, A2:1.9;

UPC:782475725915; Bearing Insert Material:Steel; Bearing Bore Shape:Tapered; Expansion Type:Expansion; Housing Type:4 Bolt Pillow Block; Base to Center Hight Numeric:3.7500 in; d:2.6875 in; Bearing Series:211 Series; Setscrew Angle:65; Bearing Locking Device:Setscrew;

N:18mm; H3:135; G:R1/8"; T max.:200 °C; A1:16 mm; Designation of housing:FCE212-; Designation of bearing:US212-39G2T20; e:1 mm; B:53.7 mm; d:61.91 mm;

Designation of housing:PH204N-; T min.:-20 °C; Weight:0.93 kg; C:12.8 kN; Dz:54 mm; N1:19 mm; L1:48 mm; L:127 mm; G:M6x1; H:70 mm;

H:120 mm; C:40.56 kN; T max.:100 °C; A5:21.5 mm; d:38.1 mm; S:19.8 mm; SW:4.76 mm; Weight:2.33 kg; T min.:-40 °C; B1:57.1 mm;

Mass:0.08 kg; Da max:38 mm; Radial clearance class:CN; Static load, C0:5 kN; Characteristic outer ring frequency, BPF0:3.58 Hz; d1:27.5 mm; B:16 mm; Characteristic inner ring frequency, BPFI:5.42 Hz; Min operating temperature, Tmin:-20 °C; rs min:0.6 mm;

C0:7.88 kN; A:21 mm; G:R1/8"; H:78 mm; L1:225 mm; Z:17 mm; Designation of housing:SP203-205/52N-; Weight:1.55 kg; SW:3 mm; C:14 kN;

Designation of housing:PE208N-; H:49.2 mm; Dz:88 mm; C:29.6 kN; Designation of closed end cover:SCC208; N:14mm; H1:19 mm; H2:99 mm; A:48 mm; T min.:-40 °C;

Radial clearance class:C3; Nlim:19,000 rpm; D:52 mm; Y2:3.35; Max operating temperature, Tmax:120 °C; Characteristic cage frequency, FTF:0.4 Hz; Mass:0.16 kg; Precision class:P0; Characteristic rolling element frequency, BSF:4.87 Hz; Characteristic outer ring frequency, BPF0:4.84 Hz;

B:61.8 mm; Designation of housing:F212-; J:143 mm; C0:32.8 kN; Weight:4.7 kg; L:175 mm; C:52.5 kN; s1:53.2 mm; B1:77.7 mm; A:48 mm;

SW:3.97 mm; H2:41 mm; d:34.92 mm; C0:15.2 kN; L1:225 mm; B:42.9 mm; G:R1/8"; T max.:100 °C; A5:25.4 mm; H:98 mm;

C:31.85 kN; B:41.2 mm; J:105 mm; Recommended tightening torque for set screw:8 Nm; d:41.28 mm; S:10.2 mm; Designation of bearing:US209-26G2; T min.:-20 °C; C0:20.8 kN; e:24 mm;

Nlim (grease):19,000 rpm; B2:16 mm; Lw:6.3 mm; D:16 mm; n:4 mm; Maximum tightening torque:3 Nm; Bearing with/without cage:Avec; d1:6 mm; Category:Bearings; e:12 mm;

A1:46 mm; T min.:-40 °C; A:70 mm; C0:40 kN; J:203 mm; L1:77 mm; Recommended tightening torque for set screw:16.8 Nm; s1:32.55 mm; H:76.2 mm; B:65.1 mm;